{
 "currentVersion": 10.81,
 "serviceDescription": "This map service layer (image layer) contains storm-water inventory for unincorporated Leon County that has been developed from a variety of sources. It contains FDOT and Leon County inventory features as well as some private connections. It falls into roughly 4 categories.\n\n1 \u2013 That which was produced by LCPW vendors.\n- Limitations with this set include bad geometry \u2013 meaning either not snapped or incorrect feature types. Table data present but not assessed.\n\n2 \u2013 Drawn in by TLCGIS staff according to as-built documents (typically areas with more complex sub-surface drainage conditions).\n- Very good geometry with somewhat less robust attribute data.\n\n3 \u2013 Drawn in by TLCGIS staff using a combination of Google Street View, 2018 DEM/Hillshade, various aerial imagery data and other data sources such as drainage easements. These reflect areas of relatively simple drainage conditions such as culverts, MES, headwalls, Spillways, etc.\n- Primary limitation being there is very little attribute data and also includes disconnected surface features that need as-builts to complete.\n\n4 \u2013 Drawn in by TLCGIS staff that represent neighborhood drainage conditions.\n- These are exclusively geometry with no real attribute data. Mostly this is mostly culverts and associated end sections where identifiable.\n\nAll data is drawn in direction of flow. Guess work has been mitigated by using Google Street View, over 10 years of various aerial imagery and DEM results to carefully place features in their actual locations. The vendor data uses GPS and is less well positioned. Any locations where unincorporated data from as-builts intersects with COTSW inventory has not been drawn in but rather connected to (snapped) to the COTSW data. *If you are a Leon County Engineer and you need access to COTSW inventory data that can be arranged. COTSW data will however not be included in the Public Works or DSEM web mapping applications.\n",
 "mapName": "Layers",
 "description": "",
 "copyrightText": "",
 "supportsDynamicLayers": true,
 "layers": [
  {
   "id": 0,
   "name": "Drainage Network",
   "parentLayerId": -1,
   "defaultVisibility": true,
   "subLayerIds": [
    1,
    2,
    3,
    4,
    5,
    6,
    7,
    8,
    9,
    10,
    11,
    12,
    13,
    14,
    15,
    16
   ],
   "minScale": 0,
   "maxScale": 0,
   "type": "Group Layer"
  },
  {
   "id": 1,
   "name": "Outfall",
   "parentLayerId": 0,
   "defaultVisibility": true,
   "subLayerIds": null,
   "minScale": 577790.554289,
   "maxScale": 0,
   "type": "Feature Layer",
   "geometryType": "esriGeometryPoint"
  },
  {
   "id": 2,
   "name": "Stormwater Pond",
   "parentLayerId": 0,
   "defaultVisibility": true,
   "subLayerIds": null,
   "minScale": 577790.554289,
   "maxScale": 0,
   "type": "Feature Layer",
   "geometryType": "esriGeometryPoint"
  },
  {
   "id": 3,
   "name": "End Point",
   "parentLayerId": 0,
   "defaultVisibility": true,
   "subLayerIds": null,
   "minScale": 577790.554289,
   "maxScale": 0,
   "type": "Feature Layer",
   "geometryType": "esriGeometryPoint"
  },
  {
   "id": 4,
   "name": "Inlet",
   "parentLayerId": 0,
   "defaultVisibility": true,
   "subLayerIds": null,
   "minScale": 577790.554289,
   "maxScale": 0,
   "type": "Feature Layer",
   "geometryType": "esriGeometryPoint"
  },
  {
   "id": 5,
   "name": "Debris Trap",
   "parentLayerId": 0,
   "defaultVisibility": true,
   "subLayerIds": null,
   "minScale": 577790.554289,
   "maxScale": 0,
   "type": "Feature Layer",
   "geometryType": "esriGeometryPoint"
  },
  {
   "id": 6,
   "name": "Junction Fixed",
   "parentLayerId": 0,
   "defaultVisibility": true,
   "subLayerIds": null,
   "minScale": 577790.554289,
   "maxScale": 0,
   "type": "Feature Layer",
   "geometryType": "esriGeometryPoint"
  },
  {
   "id": 7,
   "name": "Connectivity",
   "parentLayerId": 0,
   "defaultVisibility": true,
   "subLayerIds": null,
   "minScale": 577790.554289,
   "maxScale": 0,
   "type": "Feature Layer",
   "geometryType": "esriGeometryPolyline"
  },
  {
   "id": 8,
   "name": "Generic Storm Asset",
   "parentLayerId": 0,
   "defaultVisibility": true,
   "subLayerIds": null,
   "minScale": 577790.554289,
   "maxScale": 0,
   "type": "Feature Layer",
   "geometryType": "esriGeometryPoint"
  },
  {
   "id": 9,
   "name": "Stormwater Pond Discharge",
   "parentLayerId": 0,
   "defaultVisibility": true,
   "subLayerIds": null,
   "minScale": 577790.554289,
   "maxScale": 0,
   "type": "Feature Layer",
   "geometryType": "esriGeometryPoint"
  },
  {
   "id": 10,
   "name": "Private Point",
   "parentLayerId": 0,
   "defaultVisibility": true,
   "subLayerIds": null,
   "minScale": 577790.554289,
   "maxScale": 0,
   "type": "Feature Layer",
   "geometryType": "esriGeometryPoint"
  },
  {
   "id": 11,
   "name": "Conduit",
   "parentLayerId": 0,
   "defaultVisibility": true,
   "subLayerIds": null,
   "minScale": 577790.554289,
   "maxScale": 0,
   "type": "Feature Layer",
   "geometryType": "esriGeometryPolyline"
  },
  {
   "id": 12,
   "name": "Culvert Cross Drain",
   "parentLayerId": 0,
   "defaultVisibility": true,
   "subLayerIds": null,
   "minScale": 577790.554289,
   "maxScale": 0,
   "type": "Feature Layer",
   "geometryType": "esriGeometryPolyline"
  },
  {
   "id": 13,
   "name": "Ditch Point",
   "parentLayerId": 0,
   "defaultVisibility": true,
   "subLayerIds": null,
   "minScale": 577790.554289,
   "maxScale": 0,
   "type": "Feature Layer",
   "geometryType": "esriGeometryPoint"
  },
  {
   "id": 14,
   "name": "Ditch",
   "parentLayerId": 0,
   "defaultVisibility": true,
   "subLayerIds": null,
   "minScale": 577790.554289,
   "maxScale": 0,
   "type": "Feature Layer",
   "geometryType": "esriGeometryPolyline"
  },
  {
   "id": 15,
   "name": "Bridge Point",
   "parentLayerId": 0,
   "defaultVisibility": true,
   "subLayerIds": null,
   "minScale": 577790.554289,
   "maxScale": 0,
   "type": "Feature Layer",
   "geometryType": "esriGeometryPoint"
  },
  {
   "id": 16,
   "name": "Bridge",
   "parentLayerId": 0,
   "defaultVisibility": true,
   "subLayerIds": null,
   "minScale": 577790.554289,
   "maxScale": 0,
   "type": "Feature Layer",
   "geometryType": "esriGeometryPolyline"
  },
  {
   "id": 17,
   "name": "Stormwater Pond - Top of Bank",
   "parentLayerId": -1,
   "defaultVisibility": true,
   "subLayerIds": null,
   "minScale": 577790.554289,
   "maxScale": 0,
   "type": "Feature Layer",
   "geometryType": "esriGeometryPolyline"
  },
  {
   "id": 18,
   "name": "Outfall Drainage Area MS4",
   "parentLayerId": -1,
   "defaultVisibility": false,
   "subLayerIds": null,
   "minScale": 577790.554289,
   "maxScale": 0,
   "type": "Feature Layer",
   "geometryType": "esriGeometryPolygon"
  },
  {
   "id": 19,
   "name": "Outfall Drainage Area",
   "parentLayerId": -1,
   "defaultVisibility": true,
   "subLayerIds": null,
   "minScale": 577790.554289,
   "maxScale": 0,
   "type": "Feature Layer",
   "geometryType": "esriGeometryPolygon"
  },
  {
   "id": 20,
   "name": "Outfall Drainage Area MOF",
   "parentLayerId": -1,
   "defaultVisibility": false,
   "subLayerIds": null,
   "minScale": 577790.554289,
   "maxScale": 0,
   "type": "Feature Layer",
   "geometryType": "esriGeometryPolygon"
  },
  {
   "id": 21,
   "name": "Media Points",
   "parentLayerId": -1,
   "defaultVisibility": false,
   "subLayerIds": null,
   "minScale": 577790.554289,
   "maxScale": 0,
   "type": "Feature Layer",
   "geometryType": "esriGeometryPoint"
  },
  {
   "id": 22,
   "name": "Damage",
   "parentLayerId": -1,
   "defaultVisibility": true,
   "subLayerIds": null,
   "minScale": 577790.554289,
   "maxScale": 0,
   "type": "Feature Layer",
   "geometryType": "esriGeometryPoint"
  },
  {
   "id": 23,
   "name": "Non-Drainage Network",
   "parentLayerId": -1,
   "defaultVisibility": true,
   "subLayerIds": [
    24,
    25,
    26
   ],
   "minScale": 0,
   "maxScale": 0,
   "type": "Group Layer"
  },
  {
   "id": 24,
   "name": "Media Points Without Photos",
   "parentLayerId": 23,
   "defaultVisibility": false,
   "subLayerIds": null,
   "minScale": 577790.554289,
   "maxScale": 0,
   "type": "Feature Layer",
   "geometryType": "esriGeometryPoint"
  },
  {
   "id": 25,
   "name": "Interference",
   "parentLayerId": 23,
   "defaultVisibility": true,
   "subLayerIds": null,
   "minScale": 577790.554289,
   "maxScale": 0,
   "type": "Feature Layer",
   "geometryType": "esriGeometryPoint"
  },
  {
   "id": 26,
   "name": "Pollution Control Box",
   "parentLayerId": 23,
   "defaultVisibility": true,
   "subLayerIds": null,
   "minScale": 577790.554289,
   "maxScale": 0,
   "type": "Feature Layer",
   "geometryType": "esriGeometryPoint"
  }
 ],
 "tables": [],
 "spatialReference": {
  "wkid": 102100,
  "latestWkid": 3857
 },
 "singleFusedMapCache": false,
 "initialExtent": {
  "xmin": -9427645.91735105,
  "ymin": 3556759.680395909,
  "xmax": -9335105.809048949,
  "ymax": 3592615.0863001947,
  "spatialReference": {
   "wkid": 102100,
   "latestWkid": 3857
  }
 },
 "fullExtent": {
  "xmin": -2.0037507842788246E7,
  "ymin": -3.024097145838615E7,
  "xmax": 2.0037507842788246E7,
  "ymax": 3.024097145838615E7,
  "spatialReference": {
   "wkid": 102100,
   "latestWkid": 3857
  }
 },
 "minScale": 577790.554289,
 "maxScale": 0,
 "units": "esriMeters",
 "supportedImageFormatTypes": "PNG32,PNG24,PNG,JPG,DIB,TIFF,EMF,PS,PDF,GIF,SVG,SVGZ,BMP",
 "documentInfo": {
  "Title": "Stormwater Infrastructure - LCPW",
  "Author": "",
  "Comments": "This map service layer (image layer) contains storm-water inventory for unincorporated Leon County that has been developed from a variety of sources. It contains FDOT and Leon County inventory features as well as some private connections. It falls into roughly 4 categories.\n\n1 \u2013 That which was produced by LCPW vendors.\n- Limitations with this set include bad geometry \u2013 meaning either not snapped or incorrect feature types. Table data present but not assessed.\n\n2 \u2013 Drawn in by TLCGIS staff according to as-built documents (typically areas with more complex sub-surface drainage conditions).\n- Very good geometry with somewhat less robust attribute data.\n\n3 \u2013 Drawn in by TLCGIS staff using a combination of Google Street View, 2018 DEM/Hillshade, various aerial imagery data and other data sources such as drainage easements. These reflect areas of relatively simple drainage conditions such as culverts, MES, headwalls, Spillways, etc.\n- Primary limitation being there is very little attribute data and also includes disconnected surface features that need as-builts to complete.\n\n4 \u2013 Drawn in by TLCGIS staff that represent neighborhood drainage conditions.\n- These are exclusively geometry with no real attribute data. Mostly this is mostly culverts and associated end sections where identifiable.\n\nAll data is drawn in direction of flow. Guess work has been mitigated by using Google Street View, over 10 years of various aerial imagery and DEM results to carefully place features in their actual locations. The vendor data uses GPS and is less well positioned. Any locations where unincorporated data from as-builts intersects with COTSW inventory has not been drawn in but rather connected to (snapped) to the COTSW data. *If you are a Leon County Engineer and you need access to COTSW inventory data that can be arranged. COTSW data will however not be included in the Public Works or DSEM web mapping applications.\n",
  "Subject": "This map service layer includes the individual Stormwater Infrastructure elements that comprise Leon County's drainage network and non-network.",
  "Category": "",
  "AntialiasingMode": "Best",
  "TextAntialiasingMode": "Force",
  "Keywords": "stormwater,swmf,drainage,leon county,public works,lcpw,tallahassee,florida"
 },
 "capabilities": "Map,Query,Data",
 "supportedQueryFormats": "JSON, geoJSON",
 "exportTilesAllowed": false,
 "referenceScale": 0,
 "supportsDatumTransformation": true,
 "maxRecordCount": 3000,
 "maxImageHeight": 4096,
 "maxImageWidth": 4096,
 "supportedExtensions": ""
}